FISTFY.COM GUIDES – HOW TO GUIDE: How to Mix J-Lube lubricant
How to Mix J-Lube Lubricant – Here easy guide making J-Lube
Here is how to mix J-Lube lubricant. J-Lube is a classic lubricant. The product was originally developed as an ointment to be used in animal gynegologist studies. Due to its low cost and excellent features, it is also used in Anal Fisting sessions.
J-Lube is a powder to which water is added, after which it becomes a fancy lubricant for a Fisting session. So, This water-based lubricant, thanks to its particularly smooth composition, is well suited for use in Fisting sessions or for large dildos use. So, How to Mix J-Lube.
Read more about J-Lube lubricant under our J-Lube mix recipe. So, you learn something new about J-Lube lubricant and how to make it.

FISTFY.COM – HOW TO GUIDE: How to Mix J-Lube Lubricant
How to mix J-Lube Lubricant Step by step
Time needed: 10 minutes
How do i mix J-Lube lubricant. It’s very easy. Here’s perhaps the easiest and best J-Lube recipe and detailed instructions on how to make J-Lube lubricant yourself.
You will need the following accessories to make J-Lube lubricants: J-Lube powder, water, empty bottle, and spoon.
- Take an empty 1 liter water bottle
First, Look for an empty one litter bottle like sports drink bottle, lemonade or similar plastic bottle. Also, You can use aluminum sports drinking bottles. The glass bottle works, but be careful not to break it in your hands with hot water. Wash the empty bottle thoroughly. - Add ⅓ of hot water and 2-3 tablespoons of J-Lube powder to the bottle
You need hot water to make J-Lube. Even cold water is suitable. So, Boil 1 litter of hot water. The water does not need to be boiling, but J-Lube powder mixes faster and better in hot water. Add ⅓ part hot water to the empty bottle. Be careful not to burn yourself with hot water.
Add also 2-3 teaspoons of J-Lube powder to the bottle. You will learn the dosage of the powder over time. So, less powder will result in a smoother lubricant while a higher dose will result in a thicker lubricant. - Close the bottle and shake it well. Let a moment to settle and shake it again
Close the bottle carefully. Now shake the bottle well so that the J-Lube powder mixes well with the water. So, Don’t worry if lumps appear in the water. They will dissolve with hot water within a few minutes.
Now you can see that the J-Lube powder has dissolved with water and forms a slightly cloudy mixture with air bubbles. - Add more water and shake it more
The mixture is now very thick so add more water. You can add water now with the remaining 2/3 parts or less for a thicker lubricant. You can also add cold water at this point. This will allow the finished J-Lube to cool down faster.Leave some space in the bottle for better mixing. Wait a moment soon you will be able to apply the lubricant. - Wait a few minutes and the lubricant is ready to use
After a few minutes (5-10 min) you can check the lubricant composition. If it is necessary, add water or j-lube powder according to your preference. Now allow J-Lube to cool off before its use. If you are in a hurry to get J-Lube up and running quickly. Use partially more cold water. Finally, J-Lube is ready to use.
Notes of How to Mix J-Lube lubricant: Be careful when handling hot water. Do not use a blender or microwave to make J-Lube. So, You can only make a big mess.


Let’s get to know more of the use of J-Lube lubricant
Now you know How to Mix J-Lube lubricant. Read also,What is J-Lube? J-Lube is sold as a powder that is mixed with water itself. As a result, your hands have a very elastic and inexpensive lubricant that is the name most swimmers around the world swear by.
J-Lube in a nutshell
- Powder-in-water lubricant
- Affordable and sufficient lubricant
- Manufactured by Jorgensen Laboratories in Loveland, Colorado
- Waterproof so fits and works well with all dildos and fisting gloves
Frequently Asked Questions about J-Lube Powder
So, What is J-Lube? J-Lube is sold as a powder. it is mixed with water itself. As a result, your hands have a very elastic and inexpensive lubricant that is the name most swimmers around the world swear by.
J-Lube best way when mixed using hot water, it turns smoother and perfect to slide in. However, be careful not to burn yourself! Must wait for the lubricant to cool off! in some cases it can be added a couple of tablespoons of Crisco to make it slipper. Why? it is because most water based lubricants will dry off after a few minutes after using. So, Read more and watch the video on how to mix J-Luben yourself.
J Lube is Originally designed for veterinary uses purposes and also its used regularly by medical professionals including childbirth, J-Lube is safe for humans as well as animals. Also, remember Pre-mixed J-Lube is not recommended for very long periods of time. It provides an excellent basis for bacterial growth. You can read the J-Lube manufacturer’s safety data sheet here.
Water. best way to wash off J-Lube is with plenty of water. The bottle also mentions salt as a means of purification. It works, though, of course, using salt in intimate areas may not be the best choice. So wash off using plenty of water and also use soap to help wash it off.
J-Lube is a powder-presentation lubricant that is mixed with warm water to make the right lubricant for Anal Fisting.
Choose a bottle that will withstand hot (J-Lube is best soluble in warm water). Pour a little J-Lube into a bowl, for example 2-3 tablespoons. Pour about 1 litter of boiling water into a bottle. Close the vial and mix vigorously to dissolve the powder in water.
Do not pour all the water at once, first try to break the powder clots with a small amount of water. If clumps develop, they will take some time to melt. You can also continue stirring very vigorously. We do not recommend using a rod or blender to make J-Lube. You may have a massive mess in front of you.
The most popular lubricant for fisting is a combination mixing Crisco and J-Lube, which gives you the perfect blend, making it the right thickness. All you need is a suitable container to dispense the slider, rather than having two containers at your disposal.
Mix the J-Lube as we said earlier, then Add 2-3 tablespoons of Crisco, which must be melted in the microwave before adding to the already made J-Lub. You can also mix Crisco directly with warm J-Lube while mixing, but it will take a little longer for the Crisco to melt.
Mix the melted Crisco into the J-Lube and make sure its mixed well. Slowly the mixture becomes slightly translucent and slightly thinner. You can add more J-Lube or more Crisco to get a light running lubricant.
Thanks to the already mix, the lubricant need not be added as often as it combines the best of both water and grease based lubricants.

Learn more about lubricants
What is the difference from one lubricant to Another? Best anal lubricant? What to use as anal lube? Silicone, oil and water based creams are self-made lubricants. How do you know what kind of lubricant to choose? Knowing the basic information about lubricants will help you find the right lubricant for yourself. What is the best lubricant for anal fisting?
You may have many questions about lubricants – What is the best anal lubricant? What to use as anal lube? What lube to use for anal Fisting? How to Choose an Anal Lubricant? So, what is the best anal lubricant? In this Fisting blog article we discuss these topics, what is the best Anal Lube and Best Lube for gay sex and anal fisting.
You can read more about it here – best anal lubricant, What to use as anal lube and What lube to use for anal Fisting keep reading.
Welcome to the world of fist-fucking pleasures!
Fistfy.com – All You Need To Know About Anal Fisting. Our mission is to teach, train and share man to man all the fisting information to make it easier, accessible and useful.
You must log in to post a comment.