
J-Lube and Anal Fisting – What is J-Lube? How to mix J-Lube?
There are many factors that influence the success of Anal Fisting, especially trying anal fisting for the first time. One of these is an amazing water based lubricant, which we will go into details in this article. What lubricant to use? What is J-Lube? what is the best water based lubricant for anal fisting?
J-Lube and Anal Fisting – What is J-Lube? How to mix J-Lube? J-Lube has been a discovery for many fanciers or big toys diggers. It has found a new pleasurable dimension to sex and it has taken on more than you ever thought possible.
J-Lube is a classic lubricant which, due to its particularly smooth composition, works well with Anal Fisting even with larger dildos. It’s water-based, so you can use it safely with any size dildos and a fisting gloves.
J-Lube and Anal Fisting

The anus contains the sphincter, which is the muscle that regulates the function of the anus. Like all muscles in the body, the sphincter can also be trained to grow larger. Roughly simplified, the more you train, the bigger your muscles will grow. Like going to the gym in general, taking a fist is a long process, with the results to show up in months, and as well it requires persistence and some regularity.
Popular lubricants in this training program are J-Lube and Crisco. Each can be used alone or in combination with each other or with other lubricants.
Let’s get to know the use of J-Lube lubricant in Fisting
What is J-Lube? J-Lube is sold as a powder that is mixed with the water itself. As a result, your hands have a very elastic and inexpensive lubricant that is the name most swimmers around the world swear by.
J-Lube in a nutshell
- Powder-in-water lubricant
- Affordable and sufficient lubricant
- Manufactured by Jorgensen Laboratories in Loveland, Colorado
- Waterproof so fits and works with all dildos and fisting gloves
How to Use a J-Lube
J-Lube best way when mixed using hot water, it turns smoother and perfect to slide in. However, be careful not to burn yourself! Must wait for the lubricant to cool off! in some cases it can be add a couple of tablespoons of Crisco to make it to slipper. Why? it is because most water based lubricants will feel dry after a few minutes after using. Read more and watch a video on how to mix J-Luben yourself.
J-Lube is also sold as a pre-mixed J-Jelly lubricant so you don’t have to worry about the mixing ratio. Of course, the preparation of J-Lube becomes more advantageous when pre-mixed.
Is it safe to use J-Lube to Anal Fisting?
J Lube is Originally designed for veterinary uses purposes and also its used regularly by medical professionals including childbirth, J-Lube is safe for humans as well as animals.
Pre-mixed J-Lube is not recommended for very long periods of time. It provides an excellent basis for bacterial growth. You can read the J-Lube manufacturer’s safety data sheet here.
How to Clean J-Lube after fisting
Water. best to wash off your J-Lube is with plenty of water. The bottle also mentions salt as a means of purification. It works, though, of course, using salt in intimate areas may not be the best choice. So wash off using plenty of water and y also use soap to help wash it off.
How to Mix J-Lube
J-Lube is a powder-presentation lubricant that is mixed with warm water to make the right lubricant to Anal Fisting.
Choose a bottle that will withstand hot (J-Lube is best soluble in warm water). Pour a little J-Lube into a bowl, for example 2-3 tablespoons. Pour about 1/3 liter of boiled water into a the bottle. Close the vial and mix vigorously to dissolve the powder in water.

Do not pour all the water at once, first try to break the powder clots with a small amount of water. If clumps develop, they will take some time to melt. You can also continue stirring very vigorously. We do not recommend using a rod or blender to make J-Lube. You may have a massive mess in front of you.
Mix more…
When the lubricant looks sticky and slightly slick, you can add more J-Lube to make the lubricant thicker or add water to make it thinner as you preffer. When the J-Lube cools down and stops for a moment, it becomes thicker. Take this into consideration when making lubricant.
You can easily add J-Lube Powder to a warm already mixed and when mixing it will be thicker if it feels too thin, or add more water if it is too thick. Also note that the results of J-Lube is not a fluid-fluid as traditional lubricants, it is but thicker and more elastic.
Once the desired and perfect thickness form has been achieved, we recommend pouring the lubricant into a sports drink bottle or other bottle with a stopper. It makes dispensing the lubricant easy. Be careful as the slider is still very warm!
Allow the lubricant to cool either at room temperature or in the refrigerator. Allow the slip in the fridge to warm up a moment before use as J-Lube is best used at room temperature. J-Lube is now ready to be used.
Once the fisting session is over, the rest of the lubricant can be stored in the refrigerator as it can be reused. Note: J-Lube is rich in sugars, which will give over time no use due to descompousure. We recommend that you keep it in the refrigerator fo up to three weeks, after we recommend discarding it.
Integration of J-Lube and Crisco

The most popular lubricant for fisting is a combination mixing Crisco and J-Lube, which gives you a the perfect blend making the right thickness. All you need is a suitable container to dispense the slider, rather than having two containers at your disposal.
How to mix J-Lube and Crisco
Mix J-Lube as we said earlier in J-Lube. Add 2-3 tablespoons of Crisco, which must be melted in the microwave before adding to the already made J-Lub. You can also mix Crisco directly with warm J-Lube while mixing, but it will take a little longer for the Crisco to melt.
Mix the melted Crisco into the J-Lube and make sure its mixed well. Slowly the mixture becomes slightly translucent and slightly thinner. You can add more J-Lube or more Crisco to get a light running lubricant.
Thanks to the ready mix, the lubricant need not be added as often as it combines the best of both water and grease based lubricants.
Best J-Lube recipes
So, How do i mix J-Lube. It’s very easy. Here’s perhaps the world’s easiest and best J-Lube recipe. Also, more J-Lube recipes and blending instructions can be found at Fisty.com Fisting online course.What is your J-Lube recipe?
World’s Best J-Lube Recipe
This is how you mix J-Lube easily.
-
- Take an empty 1 liter water bottle.
- Add 1/3 of hot water to the bottle (no boiling needed). Add 2-3 tablespoons of J-Lube powder to the bottle. Close the bottle and shake well.
- Let the moment settle and shake again. Add the following 1/3 of water and shake more.
- After a while (5-10 min) you can check the lubricant composition. If necessary, add water or j-lube powder according to your preference.
- Wait for a moment and the lubricant is ready for use in the Fisting session.
Important warning: J-lube lubricant may be hot. At the end, you can also add cold water to the bottle and its ready to use.
Welcome to the world of fist-fucking pleasures!
Fistfy.com – All You Need To Know About Anal Fisting. Our mission is to teach, to train and to share man to man fisting information and make it easy, accessible and useful.